Pump Only - Polypropylene Banjo Pumps

Banjo Pumps - Polypropylene Pumps - Pump Only

Banjo Pumps are used in various Agriculture and Industrial liquid flow applications. Banjo Pumps are available in cast iron materials and are available in 1 ½”, 2” 3”, and 4” depending on Type. Pump Options include: Pump with gas engine, Pedestal Pump, Pump Only, Pump with Electric Motor, Hydraulic Pump, Wet Seal Pump, and C-Flange Pump.

For Product Availability and a free price quote, call Liquid Handling Products Inc. at 800-221-3233 or emailinfo@liquidhandlingproducts.net

150PO 1-1/2" Polypropylene Pumps Pump Only - 150PO Pump Manual

Polypropylene Centrifugal Pump Only: 1.5 Inch
Part Number: 150PO

• Pedestal Pump
• With the addition of the Banjo bearing pedestal, the pump is easily adaptable to electric power. A flexible shaft coupling is used between motor and pump shaft. Pump and motor assembly is mounted on a metal base.

150PO-BN 1-1/2" Polypropylene Pumps Pump Only - 150PO-BN Pump Manual

Polypropylene Pump Only: 1.5 Inch Buna
Part Number: 150PO-BN

• Pedestal Pump
• With the addition of the Banjo bearing pedestal, the pump is easily adaptable to electric power. A flexible shaft coupling is used between motor and pump shaft. Pump and motor assembly is mounted on a metal base.

150PO-V 1-1/2" Polypropylene Pumps Pump Only - 150PO-V Pump Manual

Polypropylene Centrifugal Pump Only: 1.5 Inch FKM
Part Number: 150PO-V

• Pedestal Pump
• With the addition of the Banjo bearing pedestal, the pump is easily adaptable to electric power. A flexible shaft coupling is used between motor and pump shaft. Pump and motor assembly is mounted on a metal base.

200PEO 2" Polypropylene Pumps Pump Only - 200PEO Pump Manual

Polypropylene Pump Only: Only 2 Inch
Part Number: 200PEO

• CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump.
• Corrosion resistant.
• DO NOT USE WITH FLAMMABLE LIQUIDS.
• Lightweight.
• Low maintenance.
• Maximum Motor Protection! We have designed the new Banjo poly pump to protect the motor seal in the event of pump seal failure. We have separated the pump from the motor by 1" spacer and installed a special slinger/shaft seal that completely protects the engine from any corrosive fluids. This new slinger design is the best in the poly pump industry at protecting your motor.
• Precision molded construction.
• Superior design.

200PHA 2" Polypropylene Pumps Pump Only - 200PHA Pump Manual

Polypropylene Pump Only: No Hydraulic Motor 2 Inch
Part Number: 200PHA

• 12 H.P. Motor.
• 3600 R.P.M.
• CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump.
• DO NOT USE WITH FLAMMABLE LIQUIDS.
• GRESEN® MGG2 HYDRAULIC MOTOR
• Hydraulic fluid capacity - Minimum 6 Gallons / Maximum 10 Gallons.
• Open or closed system.

200PHAC 2" Polypropylene Pumps Pump Only - 200PHAC Pump Manual

Polypropylene Pumps: No Hydraulic Motor 2 Inch
Part Number: 200PHAC

• 12 H.P. Motor.
• 3600 RPM.
• CAUTION-WARNING: Please do not run pump dry,restrict or reduce port sizes, or dead head pump. This could cause component failure to pump.
• DO NOT USE WITH FLAMMABLE LIQUIDS.
• Hydraulic fluid capacityMinimum 6 gallons / Maximum 10 gallons.
• HYDRAULIC MOTOR
• Open or closed system.

200PO 2" Polypropylene Pumps Pump Only - 200PO Pump Manual

Polypropylene Pump Only: 3 Vane Impeller 2 Inch
Part Number: 200PO

• Pedestal Pump
• With the addition of the Banjo bearing pedestal, the pump is easily adaptable to electric power. A flexible shaft coupling is used between motor and pump shaft. Pump and motor assembly is mounted on a metal base.

200PO-BN 2" Polypropylene Pumps Pump Only - 200PO-BN Pump Manual

Polypropylene Pump Only: 2 Inch Buna
Part Number: 200PO-BN

• Pedestal Pump
• With the addition of the Banjo bearing pedestal, the pump is easily adaptable to electric power. A flexible shaft coupling is used between motor and pump shaft. Pump and motor assembly is mounted on a metal base.

200PO-V 2" Polypropylene Pumps Pump Only - 200PO0V Pump Manual

Polypropylene Pump Only: Stainless Steel Seal 2 Inch FKM
Part Number: 200PO-V

• Pedestal Pump
• With the addition of the Banjo bearing pedestal, the pump is easily adaptable to electric power. A flexible shaft coupling is used between motor and pump shaft. Pump and motor assembly is mounted on a metal base.

205PO 2" Polypropylene Pumps Pump Only - 205PO Pump Manual

Polypropylene Pump Only: 5 Vane Impeller 2 Inch FKM
Part Number: 205PO

• Pedestal Pump
• With the addition of the Banjo bearing pedestal, the pump is easily adaptable to electric power. A flexible shaft coupling is used between motor and pump shaft. Pump and motor assembly is mounted on a metal base.

205PO-V 2" Polypropylene Pumps Pump Only - 205PO-V Pump Manual

Polypropylene Pump Only: 5 Vane Impeller 2 Inch
Part Number: 205PO-V

• Pedestal Pump
• With the addition of the Banjo bearing pedestal, the pump is easily adaptable to electric power. A flexible shaft coupling is used between motor and pump shaft. Pump and motor assembly is mounted on a metal base.

205PO-VA 2" Polypropylene Pumps Pump Only - 205PO-VA Pump Manual

Polypropylene Pump Only: 2 Inch
Part Number: 205PO-VA

• Pedestal Pump
• With the addition of the Banjo bearing pedestal, the pump is easily adaptable to electric power. A flexible shaft coupling is used between motor and pump shaft. Pump and motor assembly is mounted on a metal base.

215PO 2" Polypropylene Pumps Pump Only - 215PO Pump Manual

Polypropylene Pump Only: Mechanical Seal 2 Inch FKM 5 Vane Impeller
Part Number: 215PO

• Pedestal Pump
• With the addition of the Banjo bearing pedestal, the pump is easily adaptable to electric power. A flexible shaft coupling is used between motor and pump shaft. Pump and motor assembly is mounted on a metal base.

230PO 2" Polypropylene Pumps Pump Only -

Polypropylene Super Pump Only: 2 Inch
Part Number: 230PO

• 100% PTFE seats.
• FKM (viton type) seals.
• Glass-filled polypropylene.
• Lightweight.
• Maximum operating pressure 100 P.S.I. @ 70°F & 75 P.S.I. @ 150°F.
• Unique compact design.

230POV 2" Polypropylene Pumps Pump Only -

Polypropylene Super Pump: 2 Inch Elasomers
Part Number: 230POV

• 100% PTFE seats.
• FKM (viton type) seals.
• Glass-filled polypropylene.
• Lightweight.
• Maximum operating pressure 100 P.S.I. @ 70°F & 75 P.S.I. @ 150°F.
• Unique compact design

300PHA 3" Polypropylene Pumps Pump Only - 300PHA_manual.pdf

Polypropylene Pump Only: 3 Inch
Part Number: 300PHA

• Pedestal Pump
• With the addition of the Banjo bearing pedestal, the pump is easily adaptable to electric power. A flexible shaft coupling is used between motor and pump shaft. Pump and motor assembly is mounted on a metal base.

300PO 3" Polypropylene Pumps Pump Only - 300PO_manual.pdf

Polypropylene Pumps: Unassembled 3 Inch
Part Number: 300PO

• Corrosion resistant.
• High performance impellers.
• High strength polypropylene.
• Lightweight – portable.

300POV 3" Polypropylene Pumps Pump Only - 300POV Pump Manual

Polypropylene Pump Only: 3 Inch FKM
Part Number: 300POV

• Pedestal Pump
• With the addition of the Banjo bearing pedestal, the pump is easily adaptable to electric power. A flexible shaft coupling is used between motor and pump shaft. Pump and motor assembly is mounted on a metal base.

M220PO 2" Polypropylene Pumps Pump Only -

Manifold Poly Super Pump Only: 2 Inch with 4 Vane Impeller
Part Number: M220PO

• 1" & 2" fittings pressure to 150 P.S.I. at 70°F.
• 3" fittings pressure to 125 P.S.I. at 70°F.
• Easy On/Off hose connections.
• Positive seals.
• Quick &easy assembly.