 
|
Bearing Pedestal Cast Iron Banjo Pumps
|

|
Banjo Pumps
- Cast Iron Pumps
- Bearing Pedestal
Banjo Pumps are used in various Agriculture
and Industrial liquid flow applications. Banjo Pumps are available
in cast iron materials and are available in 1 ½,
2 3, and 4 depending on Type. Pump Options
include: Pump with gas engine, Pedestal Pump, Pump Only, Pump
with Electric Motor, Hydraulic Pump, Wet Seal Pump, and C-Flange
Pump.
For Product Availability and a free
price quote, call Liquid Handling Products Inc. at 800-221-3233 or email info@liquidhandlingproducts.net |
150PBI
1-1/2" Cast Iron Bearing Pedestal - 150PBI
Pump Manual
Self Priming Cast Iron Pumps: 1.5 Inch
Part Number: 150PBI
- CAUTION-WARNING: Please do not run pumps
dry, restrict or reduce port sizes or dead head pumps. This could
cause component failure to pump.
- Recommended horsepower, listed below,
is for water only. Heavier fluids may require additional horsepower
or a trimmed impeller.
- Pedestal pump for long coupling to electric
motor.
- IMPORTANT DO NOT USE WITH FLAMMABLE LIQUIDS.
- Pump Only packs complete and ready for
attachment to gasoline engine.
|
200PBI
2" Cast Iron Bearing Pedestal - 200PBI
Pump Manual
Cast Iron Self Priming Pump: Bearing Pedestal
2 Inch 200PBI
Part Number: 200PBI
- CAUTION-WARNING: Please do not run pumps
dry, restrict or reduce port sizes or dead head pumps. This could
cause component failure to pump.
- Recommended horsepower, listed below,
is for water only. Heavier fluids may require additional horsepower
or a trimmed impeller.
- Pedestal pump for long coupling to electric
motor.
- IMPORTANT DO NOT USE WITH FLAMMABLE LIQUIDS.
- Pump Only packs complete and ready for
attachment to gasoline engine.
|
222PBI
2" Cast Iron Bearing Pedestal - 222PBI
Pump Manual
Cast Iron Pump: with Bearing 2 Inch EPDM
Part Number: 222PBI
- 2" CAST IRON PEDESTAL PUMP
- 3/4" straight keyed shaft.
- Carbon ceramic seal with stainless steel
cup and spring with FKM (viton type) rubber.
- Cast iron construction for rugged dependable
service.
- Dynamically balanced impeller.
- Easily adaptable to electric motor (flexible
coupling not included).
- Replaceable inlet and outlet flanges.
|
300PBI
3" Cast Iron Bearing Pedestal - 300PBI
Pump Manual
Cast Iron Pedestal Pump: with Bearing 3
Inch
Part Number: 300PBI
- Banjo Pumps will not self-prime if a 1750
RPM motor is used.
- IMPORTANT
- Pedestal pump for long coupling to electric
motor.
- Pump Only packs complete and ready for
attachment to gasoline engine.
- Recommended horsepower, listed below,
is for water only. Heavier fluids may require additional horsepower
or a trimmed impeller.
|
333PBI
3" Cast Iron Bearing Pedestal - 333PBI
Pump Manual
Self Priming Pump: 333 Series High Vol
Cast Iron 3 Inch
Part Number: 333PBI
- V Shaped for quicker priming.
- Durable cast iron construction.
- Dynamically balanced impeller.
- Graphite loaded silicon carbide sealwith
stainless steel cup and spring with FKM (viton type) rubber.
- Large weep holes between pump end and
engine.
- Pump end separated from engine.
- Replaceable inlet and outlet flanges.
|
444PBI
4" Cast Iron Bearing Pedestal - 444PBI
Pump Manual
Self Priming Pump: Series 444 Bearing Pedestal
4 Inch
Part Number: 444PBI
- V Shaped for quicker priming.
- CAUTION-WARNING: Please do not run pump
dry, restrict or reduce port sizes, or dead head pump. This could
cause component failure to pump.
- DO NOT USE WITH FLAMMABLE LIQUIDS.
- Durable cast iron construction.
- Dynamically balanced impeller.
- Graphite loaded silicon carbide seal with
stainless steel cup and spring with FKM (viton type) rubber.
- Large weep holes between pump end and
engine.
- Pump end separated from engine.
- Replaceable inlet and outlet flanges.
|
M222PBIW
2" Cast Iron Bearing Pedestal -
Manifold Cast Iron Pump: Wet Seal 2 Inch
Bearing Pedestal
Part Number: M222PBIW
- Run Dry Capability!
- Durable cast iron construction.
- DO NOT USE WITH FLAMMABLE LIQUIDS.
- Dynamically balanced impeller.
- Carbon ceramic seal with stainless steel
cup and spring with FKM (viton type) rubber.
- Large weep holes between pump end and
engine or motor.
- V Shaped for quicker priming.
|
M332PBIW
3" Cast Iron Bearing Pedestal -
Manifold Cast Iron Pump: Wet Seal 3 Inch
Bearing Pedestal
Part Number: M332PBIW
- Run Dry Capability!
- Durable cast iron construction.
- DO NOT USE WITH FLAMMABLE LIQUIDS.
- Dynamically balanced impeller.
- Carbon ceramic seal with stainless steel
cup and spring with FKM (viton type) rubber.
- Large weep holes between pump end and
engine or motor.
- V Shaped for quicker priming.
|
|
For Product Availability and
a free price quote, call Liquid Handling Products Inc. at 800-221-3233 or email info@liquidhandlingproducts.net |
Liquid
Handling Products Inc. specializes in systems for above and below
ground liquid handling applications for the industrial, agriculture
and municipal markets. The primary industries which we serve
are manufacturing, agriculture/produce, beverage, chemicals,
electronics/plating, pharmaceutical, nuclear, paint/ink, food,
dairy, pulp and paper, recreation and water/waste treatment plants.
We can assist you in developing a turn key system or provide
component parts to your existing system. |
Be
assured that our products whether it is tanks, pumps, valves,
piping, spray systems, gasket materials, safety equipment, and
our service and fabrication department are the finest in the
industry. We take great pride in distributing and representing
only the best and proven manufacturers in the field of liquid
handling. Let our 50 years of experience help lead you through
whatever situations or applications you may have. We ship liquid
handling products anywhere around the world. |
 |
Call
1-800-221-3233 FOR A FREE PRICE QUOTE! |
Office: 863-667-1339, 1-800-221-3233,
FAX: 863-666-2261 info@liquidhandlingproducts.net
Liquid Handling Products Inc., 3524 Waterfield Parkway.,
Lakeland, Florida 33803 |
 |
|
|
|